處理方法：檢查加熱元件、清理水管堵塞、更換損壞的閥門或水泵。
Solution: Check heating elements, clear water pipe blockages, replace damaged valves or water pumps.

處理方法：清理磨豆器、檢查進豆通道、調整磨豆粗細度、更換磨豆刀片。
Solution: Clean grinder, check bean inlet channel, adjust grind fineness, replace grinder blades.

處理方法：疏通排水管、清理廢水箱、檢查排水閥、更換排水泵。
Solution: Unclog drain pipe, clean waste water tank, check drain valve, replace drain pump.

處理方法：更換密封墊圈、緊固鬆動部件、修復或更換水箱、檢查水管連接。
Solution: Replace gaskets, tighten loose parts, repair or replace water tank, check water pipe connections.

處理方法：檢查錯誤代碼、重置系統、檢查安全傳感器、修復或更換控製板。
Solution: Check error codes, reset system, inspect safety sensors, repair or replace control board.

處理方法：檢查電源線、更換保險絲、修復或更換顯示面板、檢查電路連接。
Solution: Check power cord, replace fuse, repair or replace display panel, inspect circuit connections.

處理方法：檢測主板故障、更換匹配型號的主板、重新編程設置、系統測試。
Solution: Detect main board faults, replace with matching model, reprogram settings, system testing.

處理方法：清理咖啡出口、檢查水泵壓力、疏通咖啡粉通道、調整咖啡粉用量。
Solution: Clean coffee outlet, check water pump pressure, unclog coffee powder channel, adjust coffee powder amount.

處理方法：檢查短路問題、更換損壞電線、修復加熱元件、更換電源開關。
Solution: Check for short circuits, replace damaged wires, repair heating elements, replace power switch.

處理方法：執行系統重置、檢查水箱水位、清理水垢、更新固件或軟件。
Solution: Perform system reset, check water tank level, descale, update firmware or software.

處理方法：檢查磨豆機電機、清理磨豆室堵塞、更換磨豆機皮帶、修復控製線路。
Solution: Check grinder motor, clear grinder chamber blockage, replace grinder belt, repair control circuit.